kickassbmx products proper bike co

Check out the Proper bikes web site at www.properbikeco.com

Proper Bike Co. make some really nice frames and parts including some super light hubs. Luke Barling and Dan Baker ride for Proper in Australia.

Click here for BB and Head set bearing kits

Mike Miller TTL Frame 20.4", 20.8" or 21.2" top tube // Translucent Black, Translucent Red or Translucent Clear

> 100% seamless 4130 Crmo tubing
> Headtube, bottom bracket and dropouts heat-treated
> Laser cut 5mm dropouts
> Built in seatclamp
> Double butted toptube
> 75° head / 71° seat / 13.3" - 14.4" chain stays
> Spanish BB
> Internal headset
> With removable gyro tabs, cable guides and U-Brake mounts
> Weight 2.2 kg / 4.9lbs

Team bars // Black, Red, Silver or Clear Raw

> 9-butted crmo tubing super light and strong
> Upsweep: 2 degrees, Backsweep: 10 degrees
> Rise 8”
> Width 28"
> Weight 870g

TTL bars // Black, Translucent Brown or Translucent Raw

> 9-butted crmo tubing super light and strong
> Upsweep: 2 degrees, Backsweep: 10 degrees
> Rise 8”
> Width 28''
> Weight 870g

Proper rims // Black / Gold / Green / Red / Blue / Chrome / Brown / Purple / White / Grey LTD / Orange

> Strong double wall construction
> 32, 36 or 48
> Weight 489g each

Click here for spokes

Front 36 proper Maglite hub and rim 4 cross should use 194mm
Front 36 proper Maglite hub and rim 3 cross should use 187mm
Front 32 proper Maglite hub and rim 4 cross should use 197mm
Front 32 proper Maglite hub and rim 3 cross should use 190mm

Rear 36 proper Maglite hub and rim 4 cross should use 194mm
Rear 36 proper Maglite hub and rim 3 cross should use 184mm
Rear 48 proper Maglite hub and rim 4 cross should use 184mm
Rear 48 proper Maglite hub and rim 3 cross should use 180mm

Rear 36 proper Ceramic driver Maglite hub and rim 4 cross should use 194mm
Rear 36 proper Ceramic driver Maglite hub and rim 3 cross should use 184mm
Rear 48 proper Ceramic driver Maglite hub and rim 4 cross should use 184mm
Rear 48 proper Ceramic driver Maglite hub and rim 3 cross should use 180mm

Proper wheel sets Front or rear in Black, Gold, Red, Blue, Chrome, Brown, Purple, White, Orange, Green or Grey LTD, Custom builds available too

> Any rim and hub colour with black or silver spokes
> Available in 32 or 36 front and 36 rear
> Black or silver stainless steel spokes
> MagLite ceramic bearing rear cassette hub with sealed bearings and 14mm hollow crmo axle
> 9 or 10 tooth driver
> Maglite front hub, low flange sealed bearing with 3/8 crmo axle
> Front and rear available separately
> Weight front 949g rear 1180g

MagnaLite front hub // Black / Gold / Red / Blue / White / Purple / Silver / Brown / Grey LTD

> Available in 32 or 36 hole
> 3/8 Heat Treated crmo axle
> High quality sealed bearings
> Large alloy cones for extra strength
> Super light 209g

Click here for spokes

The current shipment of Proper hubs are available in a super shiny gloss finish, like this:

We also have some of the Matt anodised finish stil in stock like this:

So check with us when you are ordering so you get a matching pair...

MagnaLite ceramic driver rear hub // Black / Gold / Red / Blue / white / Purple / Brown / Grey LTD / Orange / Green

> Available in 36 hole
> Available in one peice or female axle
> 14mm hollow 8000 series Heat Treated crmo axle
> New 4 pawl driver with ceramic bearing, no more blown bearings...
> RHD or LHD
> High quality sealed bearings
> Large alloy cones for extra strength
> Available with 9t or 10t driver
> Weight under 400g - One of the lightest casette hubs available,

The new Proper ceramic bearing hubs use a ceramic bush instead of the usual 3 small sealed bearings. The ceramic material is very hard wearing but also runs like a bearing so there's very little friction. These ceramic bearings will last for ages because the forces coming through from the chain is spread over a much larger area than with regular bearings... The drivers are available with 9t or 10t cogs and because the ceramic bush takes up less space the whole driver can be made smaller, which also saves weight.

Click here for spokes

The current shipment of Proper hubs are available in a super shiny gloss finish, like this:

We also have some of the Matt anodised finish stil in stock like this:

So check with us when you are ordering so you get a matching pair...

Cassette cogs // Black

> Fits all Proper bikes cassette hubs
> Available in 10t, 11t, 12t, 13t and 14t
> Heat Treated Crmo
> CNC machined

Double butted spokes // White / Orange

> 184mm or 192mm
> Double butted
> Heat treated
> 50pc per bag with nipples

Rim tape // Black / Red

U-Brake // Black / Blue / Red / Purple / White / Gold / Grey / Orange / Green

> CNC machined
> Extra stiff design
> Comes with CNC cable bridge
> Sintered brass pivots (helps stop break noise and vibrations)
> Comes with soft clear Koolstop pads
> Weight with all hardware 152g