> Mitch Yates signature frame
> Smaller 5mm heat treated dropouts
> Slimmer diameter tubing
> Machined spanish BB shell
> Shorter headtube for Integrated Headset
> 74.5° head angle / 71° seat angle
> 350mm chain stays (slammed)
> Removable gyro tabs
> Special X seat stay brace
> Tapered seat and chain stays
> New curved chain stay brace
> Weight 2.15 kg (4.7 lbs)

> Japanese crmo tubing
> Tapered legs
> 10mm dropouts
> Alloy top cap
> Weight 1030 g (inc top cap)

> Alloy fork top caps for Simple and other forks
> Weight 16g

> 11 butted Japanese crmo tubing
> Small diameter cross bar
> 7.5" rise, 27.5" wide, 8" rise, 27.9" wide or 8.5" rise 27.9 wide
> 11.5 degree backsweep
> 3 degree upsweep
> Weight 720g (for 8.5" rise)

> Double wall with inner layer drilled to save weight
> Spoke holes angled and offset from the middle for cross lacing
> Extra strengthening ribs
> 36 Hole
> Weight 488g

Click here for spokes and spoke length calculations

> Double wall with inner layer drilled to save weight
> Extra strengthening ribs
> Smooth round design
> Regular lacing
> 36 Hole
> Weight 515g

Click here for spokes and spoke length calculations

> Slim design
> Weight 270g

> Slim design
> Weight 270g

> Made from 6061 alloy
> 25.4mm diameter
> Length 190mm (slightly longer than most)
> Weight 134g

> Made from 6061 alloy
> 25.4mm diameter
> Length 125mm
> Weight 96g

> 36 Hole
> 17mm crmo axle with 3/8 bolts
> Ceramic driver bearings
> High quality sealed bearings
> Large alloy cones for extra strength
> Available with 9t, 10t or 11t driver
> Weight 428g

Click here for spokes and spoke length calculations

> Unique flangeless design
> 17mm alloy axle
> Special hubguards also available
> Works with regular spokes and pegs
> Should be built 4 cross
> Weight 264g

Click here for spokes and spoke length calculations

> Unique design
> Alloy versions replace the existing cone
> Plastic version slips over existing cone
> Fits Eclat front hubs too

> 7075-T6 Alloy
> Hollow front bolts clamp bars and fork with piston system
> CNC machined to save weight
> 50mm reach
> Weight 240g

> 7075-T6 Alloy
> Hollow front bolts clamp bars and fork with piston system
> CNC machined to save weight
> 55mm reach
> Weight 286g

> 7075-T6 Alloy
> Hollow front bolts clamp bars and fork with piston system
> CNC machined to save weight
> 55mm reach
> Weight 284g

> 7075-T6 Alloy
> Unique clamp design
> Hollow bolts
> Weight 258g

> Slim lightweight design
> Weight 14g

> Smooth Teflon coating
> PTFE coated multi stranded wire
> Stiff outer cable for no kinks
> Regular BMX cable end as well as small round ball for lower gyro setups

Simple Integrated headset // Black / Blue / Green / Purple

> High quality integrated headset
> weight 75g

Spanish BB // Black / Blue / Green / Purple

> Spanish BB in 19mm or 22mm
> Comes with spaces and washers
> weight 125g

Any 14mm hub and dropout

Add a slammer

Neat as!

These little gadgets fill the gap between your axle and the back of your drop out, so they work just like a chain tensioner but are super neat and light. One of the best and "simple"est ideas I've seen for a while. The slammers come in 14 sizes from 0.5mm to 8mm so will work with any frame / chain / chainwheel combination. Each slammer has a different size on each side so theres 7 diferent combinations available...

The sizes are as follows:
0.5 and 1.0mm
1.5 and 2.0mm
2.5 and 3.0mm
3.5 and 4.0mm
4.5 and 5.0mm
5.5 and 6.0mm
6.5 and 7.0mm
7.5 and 8.0mm

A Peg adaptor is also available which provides a larger area for a peg...

> Black or white packs of 40 stickers